Welcome to The Vintage Car!

We have discussions on Tools,
Garages, Cars and Vintage Paxton's Drawings - The Vintage Car - The Vintage Car
Welcome to The Vintage Car - The Hot Rod, RatRod, Muscle Car, Street Rod & Classic Car Information Portal
Username Post: Drawings        (Topic#226)
Todd Wallace 
Posts: 258
Todd Wallace
Loc: Colleyville
Registered on 02-10-09
01-02-13 10:57 AM - Post#657    

Here are 2 different drawings with 2 different drops

Attached are the files you requested regarding the mustang motor mounts that mimic the Ron Morris ones. FYI, the CAD file has different plates shown above, which were previous runs of these mounts that had different top plates for each mount. The PDFs were established so you didn't have unique top plates for each side, making things a bit easier although it takes a little more steel. There is also a random drawing in there of my T56 trans crossmember. As stated before, the PDF is printable to scale on 8.5x11 paper. Be sure to measure the scale that I included in the plot to verify that it printed to scale. The 1.0 should measure exactly an inch. The bushings to use with these mounts are the same for the rear leaf spring shackles, so you can buy either Poly or rubber bushings.

Attachment: Motor_Mounts_0.5in_Drop_Height.pdf (22.31 KB) 2727 View(s)
Attachment: Motor_Mounts_1in_Drop_Height.pdf (22.32 KB) 2704 View(s)
Attachment: Motor_Mounts_-_All_3.dwg (230.72 KB) 2788 View(s)
Attachment: Motor_Mounts_-_standard_height.pdf (21.72 KB) 2863 View(s)
Attachment: Motor_Mounts.dxf (610.58 KB) 2869 View(s)

Edited by Todd Wallace on 01-02-13 06:54 PM. Reason for edit: No reason given.

Icon Legend Permissions Topic Options
Print Topic

FusionBB™ Version 3.0 RC2 | ©2003-2010 InteractivePHP, Inc.
Execution time: 0.091 seconds.   Total Queries: 35   Zlib Compression is on.
All times are (GMT -0600) Central. Current time is 10:30 AM